TORUS DESIGN
The Stanford Torus was the principal design considered by the 1975 NASA Summer Study, which was conducted in conjunction with Stanford University (and published as Space Settlements: A Design Study, NASA Publication SP-413). It consists of a torus or donut-shaped ring that is one mile in diameter, rotates once per minute to provide Earth-normal gravity on the inside of the outer ring, and which can house 10,000 people.
“Abalakin” is a large torus depicted by artist Alexander Preuss, winner of the 2008 NSS Space Settlement Calendar Art Contest. © Alexander Preuss.
“Vademecum” is a 2006 student design similar in size to the Stanford Torus but with a more efficient shape. Painting copyright by Dan Roam courtesy of the artist.
Stanford Torus external view. The overhead mirror brings sunlight into the colony through a series of louvred mirrors on the inner ring. Painting by Don Davis courtesy of NASA
Stanford Torus cutaway view. The rotation of the torus provides Earth-normal gravity on the inside. Painting by Rick Guidice courtesy of NASA.
Stanford Torus interior. It seems unlikely that early colonies will have a population density this low. Painting by Don Davis courtesy of NASA.
Stanford Torus agriculture, conducted on multiple tiers for efficient use of space. Agriculture in space can be very productive because of the controlled environment. Painting courtesy of NASA.
Stanford Torus construction. Depicted is the final stages of installation of the radiation shielding. Painting by Don Davis courtesy of NASA.
BERNAL SPHERE
The Bernal Sphere design is very similar to that used in the science fiction series Babylon 5, although the original Bernal Sphere design is much smaller, only 1 mile in circumference, and can house 10,000 people. Click here for a more detailed description of the Bernal Sphere.
Bernal Sphere external view. It was later learned that the mirrors won’t work properly in this configuration and will need to be redesigned. Painting by Rick Guidice courtesy of NASA
Bernal Sphere cutaway view. The sphere rotates twice per minute to provide Earth-normal gravity on the inside. Painting by Rick Guidice courtesy of NASA.
Bernal Sphere agricultural rings seen in cross-section. Farming occurs in the upper layers, and animal husbandry in the lower layers where gravity is a little stronger. Painting by Rick Guidice courtesy of NASA.
Bernal Sphere interior, complete with California-style wine and cheese party, and human powered flight in the lower-gravity area near the axis. Painting by Rick Guidice courtesy of NASA.
Bernal Sphere hub still in the construction phase, with shielding and mirrors being installed. Painting by Don Davis courtesy of NASA.
Bernal Sphere low-gravity recreation area at dusk, protected by netting. Gravity becomes lower as you approach the center, and at the very top are the zero-gravity honeymoon suites. Painting by Don Davis courtesy of L5 News and National Space Society.
Bernal Sphere exterior, © by Ben Margolis.
O’NEILL CYLINDER
The O’Neill Cylinder, designed by Princeton physicist Gerard K. O’Neill, is considerably larger than the other two designs, and is referred to as an “Island 3″ or 3rd-generation space colony. The configuration consists of a pair of cylinders, each 20 miles long and 4 miles in diameter. Each cylinder has three land areas alternating with three windows, and three mirrors that open and close to form a day-night cycle inside. The total land area inside a pair of cylinders is about 500 square miles and can house several million people. The cylinders are always in pairs which rotate in opposite directions, cancelling out any gyroscopic effect that would otherwise make it difficult to keep them aimed toward the sun.
O’Neill Cylinder exterior. The modules on the large ring structure around the endcap are used for agriculture. Each module could have differing environments ideal for a particular set of food items. Painting by Rick Guidice courtesy of NASA.
O’Neill Cylinder interior provides a 20-mile vista. Children born here would think it totally normal to have “upside down” land areas overhead. Painting by Rick Guidice courtesy of NASA.
A dramatic side view of an O’Neill Cylinder showing a cloud level forming at an altitude of 3000 feet. Painting copyright by Don Davis courtesy of the artist.
O’Neill Cylinder endcap. The artist’s inspiration came after O’Neill suggested to him that the view of San Francisco and the Golden Gate Bridge from Sausalito would provide an excellent scale reference for a later model cylindrical colony. Painting by Don Davis courtesy of NASA.
O’Neill Cylinder vista with ruddy hues caused by a solar eclipse (which would be more common at L5 than on Earth but still infrequent). The cylinders are large enough to have weather, which could even be made to change with the seasons, perhaps depending on a colonist vote. Painting by Don Davis courtesy of NASA.
In his 1973 science fiction novel Rendezvous with Rama, Arthur C. Clarke provides a vivid description of a rotating cylindrical spaceship that is about 50% larger than the classic 20-mile long O’Neill Cylinder. Artist Eric Bruneton has created this striking 3D animation of Rama.
plus:
COLOR PLATES FROM COLONIES IN SPACE
Book jacket cover art by Don Dixon shows the interior of a Stanford Torus type colony. In the foreground is one of the small towns. In the rear is an agricultural area. The buildings are sturdy structures made of brick, steel, aluminum, and glass, all obtained from lunar materials. © Don Dixon.
The illustrations below are used with permission from SCIENCE YEAR 1976, The World Book Science Annual © World Book, Inc. May not be reproduced except by permission of the publisher: www.worldbook.com.
Interior of “Sunflower” design. The structure at the upper left is a low-gravity swimming pool. © World Book, Inc.
View from inside an O’Neill colony, showing how one of the mirrors reflects sunlight. © World Book, Inc.
The spaceliner Robert H. Goddard (right foreground) brings a new group of immigrants to help settle colonies of the very large type proposed by Gerard O’Neill. © World Book, Inc.
View of the largest colonies, showing the agricultural cylinders. © World Book, Inc.
The completed lunar base. Rockets such as the one in the foreground center have delivered elements of the base, including the housing and agricultural modules at the right. This base supports the operation of the mass driver, at left, adjacent to a row of communications antennas. The mass driver launches material from the lunar surface to be used in Earth orbit to build colonies and solar power satellite stations. © World Book, Inc.
Originally on National Space Society:
Torus Design
Bernal Sphere
O’Neill Cylinder
Color Plates from Colonies in Space
###
SOCKS is Fosco Lucarelli and Mariabruna Fabrizi of MICROCITIES, Architecture Cityscape, Landscape.
Except where otherwise noted, the content on this site is licensed under a Creative Commons Attribution-ShareAlike 3.0 license.
The post Orbital Space Colonies and Geometric Primitives appeared first on h+ Media.
